- Roundtable - muug.ca

further to the WRT54G info
by DAN KEIZER 15 Jun '05

15 Jun '05

Further to Bill's presentation at last night's MUUG meeting. I picked up a WRT54GS model a couple of weeks ago. Here are the pertinent stats on it. It is interesting to note that the serial interface is active, yet has no headers to connect to. I believe there are mods you can make to your board (if you are so inclined and are good with a soldering iron) ... anyways, here's the stats on mine... Dan. # cat /proc/version Linux version 2.4.20 (root(a)linuxdev.sveasoft.com) (gcc version 3.2.3 with Broadcom modifications) #2 Thu Apr 21 19:40:17 CEST 2005 # cat /proc/cpuinfo system type : Broadcom BCM947XX processor : 0 cpu model : BCM3302 V0.7 BogoMIPS : 199.47 wait instruction : no microsecond timers : yes tlb_entries : 32 extra interrupt vector : no hardware watchpoint : no VCED exceptions : not available VCEI exceptions : not available unaligned_instructions : 11252 dcache hits : 4278189690 dcache misses : 1624961153 icache hits : 4047464064 icache misses : 4215251484 instructions : 0 # cat /proc/meminfo total: used: free: shared: buffers: cached: Mem: 30990336 14032896 16957440 0 1900544 6356992 Swap: 0 0 0 MemTotal: 30264 kB MemFree: 16560 kB MemShared: 0 kB Buffers: 1856 kB Cached: 6208 kB SwapCached: 0 kB Active: 4920 kB Inactive: 5272 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 30264 kB LowFree: 16560 kB SwapTotal: 0 kB SwapFree: 0 kB # cat /proc/interrupts CPU0 3: 1192 MIPS serial 4: 388452 MIPS eth1 5: 23706 MIPS eth0 7: 3959546 MIPS timer ERR: 0 # cat /proc/tty/driver/serial serinfo:1.0 driver:5.05c revision:2001-07-08 0: uart:16550A port:B8000300 irq:3 baud:115740 tx:13740 rx:0 RTS|DTR 1: uart:16550A port:B8000400 irq:0 tx:0 rx:0 CTS|DSR|CD #

2 1

Accounting Software for Linux
by John Lange 15 Jun '05

15 Jun '05

Further to a question asked at the meeting last night I stumbled upon this software: "[myBooks] is a double-entry, fully audited accounting system that conforms to the standards of GAAP and is modifiable, scalable, and portable." http://www.appgen.com/aptus/my_books_professional_linux2.htm# -- John Lange President OpenIT ltd. www.Open-IT.ca (204) 885 0872 VoIP, Web services, Linux Consulting, Server Co-Location

1 0

Voxilla Canada Store
by John Lange 15 Jun '05

15 Jun '05

Some people at the meeting were interested in the Canadian store where you can order VoIP devices including the very good and reasonably priced Sipura 841 phone that Bill demoed at the meeting. http://store.voxilla.ca/home.php -- John Lange President OpenIT ltd. www.Open-IT.ca (204) 885 0872 VoIP, Web services, Linux Consulting, Server Co-Location

1 0

Creating devices, slowly
by Glen Ditchfield 10 Jun '05

10 Jun '05

I have SuSE 9.2, kernel 2.6.8, on an elderly laptop. During boot-up, it prints "Creating devices", and then pauses for over a minute before printing a message about loading the Reiserfs module. Is there some way I can find out what it is doing and why it is taking so long?

1 0

MUUG Meeting, June 14, 7:30pm -- Open Source on the Linksys WRT54G
by gedetil＠cs.umanitoba.ca 09 Jun '05

09 Jun '05

[Posted to man.unix.general and other news groups] ------ Forwarded Article <d89scv$2af$1(a)canopus.cc.umanitoba.ca> ------ From gedetil(a)cs.umanitoba.ca (Gilbert E. Detillieux) The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting on Tuesday, June 14. The meeting topic for this month is as follows: Open Source on the Linksys WRT54G Bill Reid will demo the WRT54G wireless router running Open Source firmware. Linksys used Linux to create their firmware and released the source. Many versions of the firmware are available. Bill will demo the firmware version from Sweasoft. Hopefully he will also be able to demo the OpenWRT Linux distro for the WRT54G, and possibly also Asterisk running on OpenWRT. Bill will also demo a couple of IP phones: the wireless WiSIP and the Sipura 841. The group holds its general meetings at 7:30pm on the second Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. ********************************************************************** Please note our meeting location: The IBM offices, at 400 Ellice Ave. (between Edmonton and Kennedy). When you arrive, you will have to sign in at the reception desk, and then wait for someone to take you (in groups) to the meeting room. Please try to arrive by about 7:15pm, so the meeting can start promptly at 7:30pm. Don't be late, or you may not get in. (But don't come too early either, since security may not be there to let you in before 7:15 or so.) Limited parking is available for free on the street, or in a lot across Ellice from IBM, for $1.00 for the evening. Indoor parking is also available nearby, at Portage Place, for $2.00 for the evening. ********************************************************************** For more information about MUUG, and its monthly meetings, check out their Web server: http://www.muug.mb.ca/ Also note that MUUG maintains two mailing lists, called "muug-announce" and "roundtable". If you're not already on these lists, we encourage you to subscribe now: http://www.muug.mb.ca/mailman/listinfo/ The "muug-announce" list is used for monthly meeting announcements (such as this one) as well as other important announcements of interest to MUUG members. The "rountable" list is meant to be a forum for follow-ups to topics discussed at the meetings, or for round-table-style discussion on other topics that come up between meetings. Of course, for this to be effective, we need to reach a certain critical mass. So, please subscribe, and stay involved! -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.mb.ca> Manitoba UNIX User Group Web: http://www.muug.mb.ca/ P.O. Box 130, St-Boniface Phone: (204)474-8161 Winnipeg, MB, CANADA R2H 3B4 Fax: (204)474-7609 ------ End of Forwarded Article

1 0

Linux Summer Camp in Winnipeg for High Schoolers
by Stuart Williams 30 May '05

30 May '05

I'm running a Linux Summer Camp for high school students. I would love your help in two respects: 1. Help spread the word, to high school students who would be interested in learning more about Linux and computer programming, or to people such as high school teachers who could pass along the information. 2. Give me ideas or offers for field trips or guest speakers. Do any of you who have access to interesting computing installations (hardware or software) want to give a tour to 10 to 20 high schoolers who might be going into our field? Do any of you have a strong interest in doing some sort of demo during the camp? The tentative schedule for the week is full and includes one field-trip slot, but I'm still planning and I'm open to suggestions. I'll include a URL to the information page below, but here's some more background information in case you're curious. The camp is at Canadian Mennonite University in Winnipeg (in the old School for the Deaf at Grant Ave. and Shaftesbury Blvd.) where I teach Computer Science part-time (consulting the other part). It's open to students entering grades 10, 11 and 12. The University is Mennonite in the religious sense, but the camp is open to anyone, i.e. any or no religion is fine. Last summer I focussed on installing and configuring Linux and there were 8 campers. This summer will be more focussed on programming, but still on Linux and with a significant amount of Linux focus. The programming will be in Python -- the same language we use to teach first-year Computer Science students. Of last year's 8 attendees, 7 (so far) are planning to return, so I think the camp last summer was a success. This boosts my confidence that this summer will also be a satisfying experience for the students. It's an overnight camp including food and lodging and with planned evening activities. The URL for camp information is http://www.cmu.ca/computercamp and includes a short outline of tentative topics. Stuart Williams

1 0

WRT54G kewlness
by Dan Keizer 26 May '05

26 May '05

Ramblings for the day ... I recall there being some discussions on the list about this device and looked into it a bit more and was quite impressed. It beat my old pc firewall and uses less power (and decibels) to boot (less power is good with my machines) ... Just picked up one of these babies (BestBuy $90 or some such) .. sweat deal ... Actually, it's a WRT54GS (speedy software thingy, ugh) .. but .. has twice the memory! So, starting to sniff around the net and find out more ... man, is there more ... http://openwrt.org/ .. main site of stuff ... http://www.wrt54g.com/ .. another site ... http://www.sveasoft.com/ ... Thinking that most asterisk guys are on this list too ... how to put asterisk on your WRT54G! http://lestblood.imagodirt.net/archives/106-Asterisk-on-OpenWRT-part-2.html Naturally, extending this into the asterisk world, and me being a ham radio operator, the thought crosses my mind about utilizing asterisk for repeater interoperation ... a quick google and it's already been done: http://www.voip-info.org/wiki-Radio The kewl things you can do with this device just amazes me ... Just havin' fun ... Dan.

2 1

Xen gotcha
by Bill Reid 20 May '05

20 May '05

I was playing with Xen and bumped into an issue which stumped me for a while. If you use the binary dstribution from the Xen site don't fall into the trap that I did. I was using the Quick Start guide on RedHat and they suggested the grub.conf should look like: (my /boot is hd0,0) title Xen 2.0 / XenLinux 2.6.10 root (hd0,0) kernel /xen.gz dom0_mem=128M ..... when in fact the xen.gz from the binary distribution does not support using M in the dom0_mem parameter. It complains that there is not enough space for the Guest OS. I should have used: title Xen 2.0 / XenLinux 2.6.10 root (hd0,0) kernel /xen.gz dom0_mem=131072 noreboot .... The noreboot is a good parameter to use for testing since without it the xen microkernel reboots after 10 seconds which is a pain when you are trying to read the error messages. :-( -- Bill

1 0

re: [RndTbl] RF networks
by Daryl Fonseca-Holt 13 May '05

13 May '05

> At the meeting on Tuesday, there was a discussion from an individual (of > course I can't remember his name and I was 2 seats away) about the > troubles he was having with his RF-based internet provider. I can't > recall which provider he was using ... if you're here, drop me a line .. > or if anyone else recalls what rf provider was mentioned, let me know too.. > > thanks. > > Dan. Dan, It was me. The ISP is Rainyday Software Corp. at http://www.rainday.ca

1 0

RF networks
by Dan & Michele 13 May '05

13 May '05

At the meeting on Tuesday, there was a discussion from an individual (of course I can't remember his name and I was 2 seats away) about the troubles he was having with his RF-based internet provider. I can't recall which provider he was using ... if you're here, drop me a line .. or if anyone else recalls what rf provider was mentioned, let me know too.. thanks. Dan.

2 1