- Roundtable - muug.ca

Followup on slow file transfer on my LAN
by Mike Pfaiffer 30 Jan '06

30 Jan '06

The background is I want to transfer files between machines on my LAN. Basically taking advantage of free space and access to a burner as resources come available. The network is a wired 10/100 network running off a home router. Just about any machine I connect to the LAN works fine. My main machine doesn't (FC 2). Upload speed to a server is fine. Download is quite a bit slower. I've been ftping from an OS X Mac to my Linux box for the last week. I've been peaking at 5Kb/sec per connection. Sustained rates are around 2.0 - 2.3 Kb/sec. I *thought* HTTP was faster. I tried using HTTP from both the Mac and a Linux server and got similar speeds. Certain LARGE files take 2 hours to transfer from the Linux box to my machine. From the Mac it takes over night (it's a LAN - I don't mind leaving it on for hours if the job gets done). I can open multiple connections resulting in more files coming down in the same amount of time. Friends occasionally bring their machines over and get really good transfer rates. Five minutes or so for one of the LARGE files I mentioned. I tried an experiment. I booted into the M$ side of my machine. Went to the DOS prompt. I ftp'd a large file (120 MB) after about 5 - 7 minutes I stopped the transfer and checked the size. It was almost done. Back to Linux and it's slow again. So far with this experiment I've eliminated some possible problems. The cables should be fine. The port on the router is fine. The NIC is fine. Since it works with M$, the router is fine (although I have to check if it is limiting based on the DHCP address of the Linux box - I set up a static IP for the M$ side and won't let it have net access). I've also followed up with a suggestion to look at mii-tools. It generates an error as if the card were too old to be used this way. The Mac is refusing active connections so I'm in passive mode. Any suggestions? Later Mike -- +----------------------------------------------------------------------+ |Call-A.P.P.L.E. and the Digital Civilization http://www.callapple.org | | http://members.shaw.ca/pfaiffer = Mike Pfaiffer (B.A., B.Sc.) | +----------------------------------------------------------------------+ ----- BEGIN GEEK CODE BLOCK ----- Version: 3.12 GCS/G/IT/PA/SS d s+:- a? C++ UL L++ W++ N++ o+ K- w(---) O+@ M++@ V PS+ PE !PGP t+ 5+ X R tv b+ DI+++ D++ G e++* h! r-- !y-- UF++ ------ END GEEK CODE BLOCK ------

5 6

Python group in Winnipeg
by Mike Pfaiffer 28 Jan '06

28 Jan '06

I've had a couple of people talk with me about getting info about the Python group. Here is the URL to the web page they are using. http://wiki.python.org/moin/WinniPUG Later Mike -- +----------------------------------------------------------------------+ |Call-A.P.P.L.E. and the Digital Civilization http://www.callapple.org | | http://members.shaw.ca/pfaiffer = Mike Pfaiffer (B.A., B.Sc.) | +----------------------------------------------------------------------+ ----- BEGIN GEEK CODE BLOCK ----- Version: 3.12 GCS/G/IT/PA/SS d s+:- a? C++ UL L++ W++ N++ o+ K- w(---) O+@ M++@ V PS+ PE !PGP t+ 5+ X R tv b+ DI+++ D++ G e++* h! r-- !y-- UF++ ------ END GEEK CODE BLOCK ------

1 0

Thunderbird 1.5 and phishing
by Bill Reid 27 Jan '06

27 Jan '06

I just had my first phishing email (paypal scam) caught by Thunderbird 1.5. It has an alert that warns you. A nice feature. PayPal makes it very easy to report these scams. A couple a weeks ago I tried to report an eBay phishing email and it was way too difficult. You can not report the email without registering, etc. Pretty hostile. -- Bill

3 2

Flashing Zaurus with pdaXrom
by Montana Quiring 18 Jan '06

18 Jan '06

Hello, I was wondering if anyone's tried the pdaXrom for the Sharp Zaurus? I get about 72 percent of the way through flashing the ROM and I get an error telling me that there was a "ro file system error while flashing". I've tried re-dloading it from a different source too. -Montana -- <some kinda sig here>

2 2

Sean's Links
by Shawn Wallbridge 11 Jan '06

11 Jan '06

http://del.icio.us/SeanW/muug_presentation

1 0

MUUG Meeting, Jan 10, 7:30pm -- Efficient Web Browsing
by gedetil＠cs.umanitoba.ca 04 Jan '06

04 Jan '06

[Posted to man.unix.general and other news groups] ------ Forwarded Article <dpguk5$cs$1(a)canopus.cc.umanitoba.ca> ------ From gedetil(a)cs.umanitoba.ca (Gilbert E. Detillieux) The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting on Tuesday, January 10. The meeting topic for this month is as follows: Efficient Web Browsing In this presentation, Sean Walberg will demonstrate several tools that are used to make better use of your time on the Internet. These tools include an RSS aggregator, mailing list archiver, del.icio.us, and Greasemonkey. The group holds its general meetings at 7:30pm on the second Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. ********************************************************************** Please note our meeting location: The IBM offices, at 400 Ellice Ave. (between Edmonton and Kennedy). When you arrive, you will have to sign in at the reception desk, and then wait for someone to take you (in groups) to the meeting room. Please try to arrive by about 7:15pm, so the meeting can start promptly at 7:30pm. Don't be late, or you may not get in. (But don't come too early either, since security may not be there to let you in before 7:15 or so.) Limited parking is available for free on the street, or in a lot across Ellice from IBM, for $1.00 for the evening. Indoor parking is also available nearby, at Portage Place, for $3.00 for the evening. ********************************************************************** For more information about MUUG, and its monthly meetings, check out their Web server: http://www.muug.mb.ca/ Also note that MUUG maintains two mailing lists, called "muug-announce" and "roundtable". If you're not already on these lists, we encourage you to subscribe now: http://www.muug.mb.ca/mailman/listinfo/ The "muug-announce" list is used for monthly meeting announcements (such as this one) as well as other important announcements of interest to MUUG members. The "rountable" list is meant to be a forum for follow-ups to topics discussed at the meetings, or for round-table-style discussion on other topics that come up between meetings. Of course, for this to be effective, we need to reach a certain critical mass. So, please subscribe, and stay involved! -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.mb.ca> Manitoba UNIX User Group Web: http://www.muug.mb.ca/ P.O. Box 130, St-Boniface Phone: (204)474-8161 Winnipeg, MB, CANADA R2H 3B4 Fax: (204)474-7609 ------ End of Forwarded Article

1 0

MTS SMTP
by Trevor Cordes 18 Dec '05

18 Dec '05

Someone (I think Shawn) was asking about this last meeting. I just hit this problem (or one related) also. Looks like MTS mail servers are not accepting email from RBL'd (ie: all Shaw dynamic IP's) servers anymore. If you run your own mail server on Shaw and you don't smarthost all email, you'll have to add a rule just for MTS to your /etc/mail/mailertable like: mts.net esmtp:shawmail.wp.shawcable.net and more for any mts-related domains (that all use the same MX) like escape.ca. Note, this won't apply to most people with simple email setups: this only applies to us weird people trying to run mail servers off of dynamic IP's. And, yes, leave it to MTS to do this in a non-standard way: they are just dropping the connection giving 554 service unavailable when they should be giving us a bounce with an indication we're being RBL'd so we know what the heck is going on.

1 0

Accurate Monitoring of system load
by John Lange 16 Dec '05

16 Dec '05

Does anyone have any suggestions for accurate monitoring of system load on web servers? In the situation where you have a server which is hosting multiple applications I've found it next to impossible to determine with any accuracy what applications or pages within those applications are causing load. At any given moment its easy to see what is using CPU and memory. But in the case of a web server these are brief spikes that don't mean anything. Whats needed is a way to see what has caused the most load over a given time period (say the last 10 minutes). Does anyone have any suggestions for tools that can help determine load. -- John Lange OpenIT ltd. www.Open-IT.ca (204) 885 0872 VoIP, Web services, Linux Consulting, Server Co-Location

4 5

(no subject)
by Montana Quiring 15 Dec '05

15 Dec '05

Sorry, I'm resending again cuz I sent from the wrong email account. Here's a link to that YES Linux distro I mentioned: http://www.yeslinux.org/ I think it's a good start for someone that's not a *NIX guru. -- <some kinda sig here>

1 0

Data Theft Story
by Shawn Wallbridge 14 Dec '05

14 Dec '05

Here is the article mentioned during the presentation... http://www.schneier.com/blog/archives/2005/12/ehijacking.html Basically, people hacked into UPS, and had a 'secure' delivery of a tape (containing 35million peoples banking information) delivered to a different address. shawn

1 0