- Roundtable - muug.ca

Identifying Intel NICs
by Adam Thompson 20 Feb '12

20 Feb '12

I just found this document on the Intel website: http://www.intel.com/support/network/sb/cs-012904.htm It provides a pretty-much-complete cross-reference of all their NICs and LOMs with part#, PBA#, PCI ID, and the link to the appropriate drivers. The footer SAYS this document was created back in 2004, but I know searching for this data on Intel’s website didn’t turn this up as recently as last year. Hope this helps someone else! -Adam Thompson athompso(a)athompso.net

1 0

seeking 1U/2U server
by Adam Thompson 20 Feb '12

20 Feb '12

I'm looking for a cheap 1U or 2U server that won't cost me more in shipping than the server itself (i.e. local pickup, ideally). Dual P-III Xeon 1.0GHz or better. (Yes, seriously. Newer CPUs are OK, too.) Dual onboard Gigabit Ethernet, *or* 64-bit PCI ("PCI-X") slot. Must have mounting rails. If you have an old rackmount server you want to get rid of, or know someone who does, please let me know. Thanks, -Adam Thompson athompso(a)athompso.net

2 1

MUUG Meeting, February 21, 7:30pm -- Linux LVM
by Gilbert E. Detillieux 15 Feb '12

15 Feb '12

*A reminder that this meeting is next Tuesday.* (Hope you didn't show up last night!) The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting on Tuesday, February 21. The meeting topic for this month is as follows: Linux LVM One of the most important new developments in the Linux 2.6 kernel was the Logical Volume Manager, version 2 (or LVM 2). Logical volume management is a widely-used technique for deploying logical rather than physical storage. With LVM, "logical" partitions can span across physical hard drives and can be resized (unlike traditional ext3 "raw" partitions). Kevin McGregor will summarize the basic principles behind the LVM and provide examples of basic operations which can be performed with it. February's RTFM will feature the traceroute(1) command, presented by our president, Katherine Scrupa. The group holds its general meetings at 7:30pm on the second Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. ********************************************************************** Please note our meeting location: The IBM offices, at 400 Ellice Ave. (between Edmonton and Kennedy). When you arrive, you will have to sign in at the reception desk, and then wait for someone to take you (in groups) to the meeting room. Please try to arrive by about 7:15pm, so the meeting can start promptly at 7:30pm. Don't be late, or you may not get in. (But don't come too early either, since security may not be there to let you in before 7:15 or so.) Non-members may be required to show photo ID at the security desk. Limited parking is available for free on the street, either on Ellice Ave. or on some of the intersecting streets. Indoor parking is also available nearby, at Portage Place, for $5.00 for the evening. Bicycle parking is available in a bike rack under video surveillance located behind the building on Webb Place. ********************************************************************** For more information about MUUG, and its monthly meetings, check out their Web server: http://www.muug.mb.ca/ Help us promote this month's meeting, by putting this poster up on your workplace bulletin board or other suitable public message board: http://www.muug.mb.ca/meetings/MUUGmeeting.pdf -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.mb.ca> Manitoba UNIX User Group Web: http://www.muug.mb.ca/ PO Box 130 St-Boniface Phone: (204)474-8161 Winnipeg MB CANADA R2H 3B4 Fax: (204)474-7609

1 0

Re: [RndTbl] Networking over home power lines
by Dan Keizer 14 Feb '12

14 Feb '12

Thanks Sean -- nothing like a pair of pager systems in the backyard :-) Lucky for me -- we're far away from any commercial setup -- but I have enough RF-generating noise from the rack of computers downstairs ... it's amazing how much RF is around us ... with most modern wireless setups, they are fairly wide open on the front-end that any noise that is around it can sometimes saturate it ... Dan. From: Sean Walberg <sean(a)ertw.com> > Date: 14 February 2012 14:45 > Subject: Re: [RndTbl] Networking over home power lines > To: Continuation of Round Table discussion <roundtable(a)muug.mb.ca> > > > If they're extra noisy, lend them to Dan's neighbours. :) > > Sean > > > On Tue, Feb 14, 2012 at 3:30 PM, Bill Reid <breid.wpg(a)gmail.com> wrote: > >> I have a pair of Ethernet over power line units if you want to try them >> out. >> >> >> On 14/02/12 12:57, John Lange wrote: >> >>> Just to be clear, I'm 100% certain that there is no transformer >>> between the buildings. Thats what I meant by "the same power system". >>> >>> On Tue, Feb 14, 2012 at 12:43 PM, ve4drk(a)gmail.com<catchall(a)**keizer.ca<catchall(a)keizer.ca>> >>> wrote: >>> >>>> these ethernet over power technologies spew RF everywhere) but would >>>> certainly look more to a wireless scenario. >>>> >>> >>> heh.. Just chucking at the irony of that statement ;) >>> >>> John >>> ______________________________**_________________ >>> Roundtable mailing list >>> Roundtable(a)muug.mb.ca >>> http://www.muug.mb.ca/mailman/**listinfo/roundtable<http://www.muug.mb.ca/mailman/listinfo/roundtable> >>> >>> ______________________________**_________________ >> Roundtable mailing list >> Roundtable(a)muug.mb.ca >> http://www.muug.mb.ca/mailman/**listinfo/roundtable<http://www.muug.mb.ca/mailman/listinfo/roundtable> >> > > > > -- > Sean Walberg <sean(a)ertw.com> http://ertw.com/ > > _______________________________________________ > Roundtable mailing list > Roundtable(a)muug.mb.ca > http://www.muug.mb.ca/mailman/listinfo/roundtable > > >

1 0

Networking over home power lines
by John Lange 14 Feb '12

14 Feb '12

>From the bit of reading I've done, it appears that a standard for networking over power lines was ratified in September 2010. Linksys has a device (plek400) for about $100. What I can't seem to find out is what the maximum theoretical distance the signal can travel? I have a situation where I'd like to get a network drop into a building that is 400m away. I've toyed with the idea of a home-brew Wifi point-to-point system but it's still relatively expensive to buy two Buffalo radios plus external antennas etc. and even then it would be on the outside of the range for that type of solution. The building is defiantly on the same power "system" so can the network-over-power devices reach 400m ? John

7 7

Re: [RndTbl] Networking over home power lines
by Dan Keizer 14 Feb '12

14 Feb '12

I was in the middle of typing a reply that says basically the same thing -- I guess I'm not as fast at typing these days :-) Basically, the same thing -- The biggest hing you need to look at is to find out if the two end-points exist on the same side of the mains. Is this commercial or residential? If it's down the road, then it may be on a separate transformer as well. Even from a residential perspective, you can have issues since you have two lines coming into the house - you may have one circuit on one side and another circuit on the other side -- the transmission may not go through/cross-over the remote transformers. Similar issues arise from X10 usage as well ... different frequencies, but similar issues. Naturally, injecting the type of frequencies these use into the circuitry of your house can also cause that same injection to show up unwanted on devices that receive on those frequencies ... ie: radios and the like. Interference may show up. I'm not an advocate of Ethernet-over-power, (I'm a ham radio operator and these ethernet over power technologies spew RF everywhere) but would certainly look more to a wireless scenario. Dan. On 14 February 2012 12:34, Robert Keizer <robert(a)keizer.ca> wrote: > My understanding is that a transformer will block that frequency. I > had looked into it for a while and I read some people making block > wide networks, but the at least in their situation the transformer at > the end of the block was filtering. > > Keep the list updated, this is interesting stuff. :) > > Rob > > On Tue, Feb 14, 2012 at 11:48 AM, John Lange <john(a)johnlange.ca> wrote: > > From the bit of reading I've done, it appears that a standard for > > networking over power lines was ratified in September 2010. > > > > Linksys has a device (plek400) for about $100. What I can't seem to > > find out is what the maximum theoretical distance the signal can > > travel? > > > > I have a situation where I'd like to get a network drop into a > > building that is 400m away. I've toyed with the idea of a home-brew > > Wifi point-to-point system but it's still relatively expensive to buy > > two Buffalo radios plus external antennas etc. and even then it would > > be on the outside of the range for that type of solution. > > > > The building is defiantly on the same power "system" so can the > > network-over-power devices reach 400m ? > > > > John > > _______________________________________________ > > Roundtable mailing list > > Roundtable(a)muug.mb.ca > > http://www.muug.mb.ca/mailman/listinfo/roundtable > _______________________________________________ > Roundtable mailing list > Roundtable(a)muug.mb.ca > http://www.muug.mb.ca/mailman/listinfo/roundtable >

1 0

The other shoe drops at Nokia...
by Gilbert E. Detillieux 10 Feb '12

10 Feb '12

Well, this probably won't come as a surprise to anyone here, but Nokia is now officially dropping support for everything but Windows Phone, for all mobile devices going forward... http://www.itworldcanadacurated.com/itwcc/permalink/89415889-THE-MICROSOFT-… http://www.businessinsider.com/the-microsoft-investor-feb-9-2012-2 -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.mb.ca> Manitoba UNIX User Group Web: http://www.muug.mb.ca/ PO Box 130 St-Boniface Phone: (204)474-8161 Winnipeg MB CANADA R2H 3B4 Fax: (204)474-7609

1 0

MUUG Meeting, February 21, 7:30pm -- Linux LVM
by gedetil＠cs.umanitoba.ca 07 Feb '12

07 Feb '12

*Please note the date change for this meeting, which is a week later.* The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting on Tuesday, February 21. The meeting topic for this month is as follows: Linux LVM One of the most important new developments in the Linux 2.6 kernel was the Logical Volume Manager, version 2 (or LVM 2). Logical volume management is a widely-used technique for deploying logical rather than physical storage. With LVM, "logical" partitions can span across physical hard drives and can be resized (unlike traditional ext3 "raw" partitions). Kevin McGregor will summarize the basic principles behind the LVM and provide examples of basic operations which can be performed with it. February's RTFM will feature the traceroute(1) command, presented by our president, Katherine Scrupa. The group holds its general meetings at 7:30pm on the second Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. ********************************************************************** Please note our meeting location: The IBM offices, at 400 Ellice Ave. (between Edmonton and Kennedy). When you arrive, you will have to sign in at the reception desk, and then wait for someone to take you (in groups) to the meeting room. Please try to arrive by about 7:15pm, so the meeting can start promptly at 7:30pm. Don't be late, or you may not get in. (But don't come too early either, since security may not be there to let you in before 7:15 or so.) Non-members may be required to show photo ID at the security desk. Limited parking is available for free on the street, either on Ellice Ave. or on some of the intersecting streets. Indoor parking is also available nearby, at Portage Place, for $5.00 for the evening. Bicycle parking is available in a bike rack under video surveillance located behind the building on Webb Place. ********************************************************************** For more information about MUUG, and its monthly meetings, check out their Web server: http://www.muug.mb.ca/ Help us promote this month's meeting, by putting this poster up on your workplace bulletin board or other suitable public message board: http://www.muug.mb.ca/meetings/MUUGmeeting.pdf -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.mb.ca> Manitoba UNIX User Group Web: http://www.muug.mb.ca/ PO Box 130 St-Boniface Phone: (204)474-8161 Winnipeg MB CANADA R2H 3B4 Fax: (204)474-7609

1 0

UG News - Last Chance to Register: 10 Things You Didn't Know about Google+ and How Links Boost Your Rankings
by Gilbert E. Detillieux 07 Feb '12

07 Feb '12

1 0

Shuttle Power Supply
by Kat 06 Feb '12

06 Feb '12

Does anyone have a Shuttle power supply they'd be willing to part with? approx 5 7/8 x 3 1/4 x 1 3/4 200W+, adapter AT (please stop laughing now) Katherine

1 0